New 1U server supports 2 AMD Opteron Model 250(2.4GHz/1MB) Processors
and 800MHz HyperTransport Technology
Support for 2 non-hot plug *SCSI
drives with U320 SCSI Host Bus Adapter and U320 SCSI Cable *NOTE: Customers who deploy SCSI
model or option will forfeit the single PCI-X expansion slot by populating
slot with SCSI HBA. SCSI option is available on all ATA models while SCSI
BTO model is only available on DL145 model with the AMD Opteron Model
250 (2.4GHz/1MB) processor
At A Glance
AMD Opteron 8000 series chipset with HyperTransport technology
1GB or 2GB of PC2700 DDR SDRAM running at 333MHz with Advanced ECC
capabilities standard, expandable to 16GB
Integrated Dual Broadcom 5704 10/100/1000 NICs (Wake on LAN and PXE
capable)
One 40GB ATA or 36.4GB 15K SCSI hard drive standard (depending on
model) with support for up to two Non-Hot-Plug ATA or *SCSI
hard drives
Protected by HP Services, one-year limited warranty which is fully
supported by HP Services and a worldwide network of resellers and service
providers. In addition, 90-day's getting started software telephone
support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care
Pack services. Certain restrictions and exclusions apply.
*NOTE: Customers who deploy SCSI
model or option will forfeit the single PCI-X expansion slot by populating
slot with U320 SCSI HBA.
NOTE: For the Standard Features shipped
in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
Processor One of the following depending on Model:
AMD Opteron Model 250 (2.4GHz/1MB)
processor supporting HyperTransport Technology.
AMD Opteron Model 248 (2.2GHz/1MB)
processor supporting HyperTransport Technology.
AMD Opteron Model 244 (1.8GHz
GHz/1MB) processor supporting HyperTransport Technology.
AMD Opteron Model 242 series
(1.6GHz/1MB) processor supporting HyperTransport Technology.
Memory Protection
Advanced ECC capabilities
Memory One of the following depending on Model:
Type
PC2700 DDR SDRAM running at
333MHz
Standard
1GB (2 x 512MB) (NOTE: Available with 1.6GHz models.)
2GB (2 x 1GB) (NOTE: Available with 2.4, 2.2 and
1.8GHz models.)
Maximum
16GB (8 x 2GB)
Network
Controller
Integrated Dual Broadcom 5704
10/100/1000 NICs (Wake on LAN and PXE capable)
5 Non-hot plug, Non-redundant
system fan shipped standard
OS Support
Microsoft Windows® 2000
Server
Microsoft Windows 2000 Advanced Server
Microsoft Windows 2003 Standard Edition
Microsoft Windows 2003 Enterprise Edition
Microsoft Windows 2003 Web Edition
Red Hat Enterprise Linux 3
SuSE Linux Enterprise Edition 8
VMware Virtualization Software
HP's new HP Systems Insight
Manager (HP SIM) helps maximize system uptime and performance and reduce
system maintenance costs by providing proactive notification of problems
before those problems result in unplanned downtime or reduced productivity.
HP SIM are both easy to set up work with the Insight Management Agents,
integrated Light-Out and Remote Insight Light-Outs Edition, and Version
Control Agents to deliver robust fault, configuration, and asset management
as well as remote administration. With HP SIM customers will also be able
to take advantage of role-based security; the ability to manage ProLiant,
Integrity, and HP 9000 systems; and plug-ins for storage, client, printer,
and power management as well as server rapid deployment, performance management,
and workload management. For more details on HP SIM visit http://www.hp.com/go/hpsim.
Optional ProLiant Essentials
Value Packs
Optional software offerings
that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs:
Intelligent Networking Pack - detects and
analyzes network bottlenecks or broken network linkages and steers traffic
to the optimum route based on network conditions.
Vulnerability and Patch Management Pack - identifies
and remediates software security vulnerabilities due to missing patches
as well as operating system configurations that can be exploited by
viruses, worms and other blended threats.
NOTE: Flexible
and volume quantity license kits are available for ProLiant Essentials Value
Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials.
Telco Rack Support
DL145 Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack
kit and an additional option kit from Rack Solutions.
(http://www.racksolutions.com/hp).
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration,
customization, integration and deployment services for HP servers and/or
storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA3000
& EVA5000, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server
model please contact your sales representative or go to http://www.hp.com/go/factory-express.
Service
and Support
HP Services provides a one-year, limited warranty fully supported by
HP Services and a worldwide network of resellers and service providers.
In addition, 90-day's getting started software telephone support may be
covered under the warranty or available for an additional fee. Enhancements
to warranty services are available through HP Care Pack services.
NOTE: Limited warranty includes 1 year
parts, 0 years Labor, 0 years on-site support
Care Pack services provide a range of life cycle support options that
let you choose the service levels that meet your business requirements,
from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available
including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13
hours, 5 day to 24 hours, 7 days call window with options including
4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft,
Linux and ProLiant Essentials solutions helping to deliver high level
of application availability. Response times range from 30 mins for critical
problems to 2 hours.
System Management, Performance Services and Mission Critical Support
Solution
HP Care Pack Services include HP branded hardware options qualified for
the server, purchased at the same time or afterwards, internal to the
enclosure, as well as 22" and smaller external monitors and tower
UPS options up to 3KVA. 22" and smaller external monitors will be
covered at the same service level and coverage period as the server. For
servers or storage systems installed within a rack, service also covers
all HP qualified rack options installed within the same rack.
NOTE: For more information on HP Care
Pack services, contact any of our worldwide sales offices or resellers
or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack NOTE: For more complete information on HP Services offerings, customers
and resellers, please visit us at: http://www.hp.com/hps NOTE: Additional information regarding worldwide limited warranty
and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
Configuration Information - Factory Integrated Models (North America only)
NOTE: For Configure to Order requirements
within EMEA region, please consult local Sales Contact. NOTE: HP does not allow factory
integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does
not support HP Factory Express Server Configuration Level 1.
Step 1: Base Configuration
Models
HP ProLiant DL145 Rack Chassis
(North America)
365172-405
Factory Integrated Models ship
with:
Integrated Dual Broadcom 5704
10/100/1000 NICs (Wake on LAN and PXE capable)
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials.
ProLiant DL145
Unique Options
DL145 CTO Rack Shipping Bracket NOTE: The DL145 CTO Rack Shipping
Bracket is required for customers who are purchasing DL145 systems as part
of a factory integrated rack. Each kit contains 4 shipping brackets, one
bracket per server. For example, a factory integrated rack with 32 nodes
would require 8 DL145 CTO Rack Shipping Bracket kits.
372851-B21
DL145 U320 SCSI Cable NOTE: The DL145 U320 SCSI Cable is
required for customers who wish to upgrade any DL145 ATA model with SCSI
functionality. This cable comes standard in the DL145 SCSI BTO Model, part
number 368232-001.
370520-B21
Processor
AMD Opteron Model 242 (1.6GHz/1MB)
Processor Option Kit
NOTE: The Tested
Product List (TPL) is a list of HP and standard 3rd party devices (hardware
or software) that have been tested by either HP or independent test houses
for basic compatibility with the HP ProLiant DL145 server. HP products are
supported by HP, non-HP products are not supported by HP. For non-HP products,
you must obtain support from their own manufacturer. Non-HP third party
products have been tested only for compatibility with the specified HP server.
This level of testing confirms proper device recognition by the HP server
and basic compatibility with the identified HP server. HP disclaims all
responsibility and liability for the manufacturing, distribution, marketing,
licensing, installation, use, performance, maintenance, safety, regulatory
certification, and support of these 3rd party products.
NOTE:
Memory configurations listed do not apply to "Factory Integrated
Models".
HP ProLiant DL145
Single Processor Models
Standard
Memory
1GB (2 x 512MB) or 2GB (2 x1GB) of PC2700 DDR SDRAM running at 333MHz, with
Advanced ECC capabilities Memory installed (depending on model). Maximum Memory
Up to 16GB of memory is available with the removal of the standard 512MB
or 1GB of memory and the optional installation of 2GB PC2700 Registered
ECC DDR SDRAM DIMM Memory kits.
Memory Options
The server provides double data
rate (DDR) synchronous dynamic RAM (SDRAM) that can improve memory clock
speed to at least 333-MHz. It activates output on both the rising and falling
edge of the system clock rather than on just the rising edge, potentially
doubling output. The server features the following advanced memory technologies:
Support for up to 16 GB of industry-standard PC2700 registered
ECC DDR SDRAM memory
Dual-Channel Memory Architecture
Memory Guidelines
Bank 1A must always be populated.
DIMMs must be installed in pairs and starting at the bank closest
to the processor.
All DIMMs in a bank must have the same part number.
DIMMs on different banks can be of different sizes.
Processor 2 must be installed before banks 2A and 2B are populated.
If processor 2 is installed, it is recommended that bank 2A be
populated before populating bank 1B.
NOTE: Chart does
not represent all possible memory configurations.
DL145 G1 Memory
Slot
1
2
3
4
5
6
7
8
Standard
(1GB)
512MB
512MB
Empty
Empty
Empty
Empty
Empty
Empty
Maximum (16GB)
2GB
2GB
2GB
2GB
2GB
2GB
2GB
2GB
Following are memory options available from HP:
1GB of Advanced ECC PC2700 DDR SDRAM DIMM Memory Kit (2 x 512 MB)
361037-B21
2GB of Advanced ECC PC2700 DDR SDRAM DIMM Memory Kit (2 x 1GB)
361038-B21
4GB of Advanced ECC PC2700 DDR SDRAM DIMM Memory Kit (2 x 2GB)